ruota sciolta.jpg
ruote disegno supporto.jpg
ruote tabella.jpg

09 Wheels for trolleys for high temperature bracket of steel zinc plated.

Wheel description
High temperature solid thermosetting resin wheel.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Axle composed of ground steel bush +PTFE, with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel top plate bracket NL
Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly riveted.

This type of bracket is suitable for lighter loads (max 400 kg). The inclusion of two ball race rings and the direct contact between the plate and the ball race ring by means of the king pin, guarantee maximum manoeuvrability and a marked reduction in side play. It requires no maintenance.
Models available: with top plate fastening, with through hole, steel stem. Suitable brakes: front-locking, rear-locking, central (hexagonal) brake system.

1) Plate: electrolytically galvanised steel plate
2) Fork: electrolytically galvanised steel plate
3) Ball Race Ring: electrolytically galvanised steel plate
4) King pin: incorporated in top plate and cold riveted
5) Swivel actions: double ring of greased balls
6) Dust seal: orange polyethylene