top of page

TRAYS

Our baking trays are made following a process that allows obtaining a high quality product which is also suitable for use in bakeries and confectionaries. Our products have technical solutions capable of guaranteeing convenience and practicability, optimising the work process. We provide high quality finishing and the material is perforated, cut, folded and welded using specialised equipment and expert technique. Corners, edges and folds are reduced to the minimum to avoid risks, knocks and crusts. The surfaces at contact with food products are designed for easy cleaning and sterilisation.
 

MANUFACTURING
Total control of the production cycle and equipment update allows us to provide:
● baking trays of all sizes, length and width, with customised thicknesses;
● perforation upon request (diameter and pitch);
● baking trays with 2, 3 or 4 turned down edges;
● turned edge with height starting from 1 mm and angle comprised between 30° and 120°;
● grooved baking trays with the number of grooves provided upon request and a minimum 20/22 mm           diameter.
The aluminium we use is classified as: annealed and flattened H 111 PERALUMAN 30 UNI 5754.
The perforation standard is obtained with a 2 mm diameter and 3.5 mm pitch. According to us, such dimensions achieve an optimal cooking and anti-adhesive ratio. The heat still circulates freely through the holes and the dough, even when pressed, has a low sticking degree. The baking tray is less subjected to getting dirty overcoming the formation of moulds and reducing the surface fat layer. The latter partially obstructs the holes reducing the cooking quality, partially detaching sticking against the product ruining its aspect and deteriorating its taste.
 

Technical details
*Technological characteristic for fixing the sheet to the frame without using rivets.
*The support frame has double stiffening rib of 30 mm. It gives an extraordinary stiffness and sturdiness.
*The perforation standard is obtained with a 2 mm diameter and 3.5 mm pitch. According to us, such            dimensions achieve an optimal cooking and anti-adhesive ratio.
*2, 3 or 4 turned down edges, with height starting from 1 cm and angle comprised between 30° and 120°.
*Flat aluminium trays 40x60 cm and 60x80 cm with rounded corners.
*We believe surface treatment using Teflon®, “Teflon®-treatment”, to be the most efficient and                      convenient choice today. Teflon®-treatment offers greater mechanical resistance with respect to silicone    or elastomer treatments. This implies longer lifestray, greater duration over time and greater number of    use cycles, alongside providing constant non-stick capacities.

teglia-piane-alluminate-con-bordo-piega-01-SB.jpg

Aluminized steel tray with bent edge

Flat baking tray in aluminised sheet with folded edge - natural  - Teflon coated - on request 2-3 or 4 open sides - edge height starting from 1 cm and angle between 30 ° and 120 °.

teglie-piane-alluminio01-sb.jpg

Aluminium full flat tray with bent edge

Flat tray in solid aluminum - thickness 15/10 - natural - silicone coated - Teflon coated - on request 2-3 or 4 open sides - edge height starting from 1 cm and angle between 30 ° and 120 °.

teglie-piana-alluminio-forato-teflonata-01l.jpg

Aluminium perforated flat tray

Perforated aluminum tray 15/10 thickness with folded edge - Teflon coated.

teglia-stampata-in-alluminio-forato-bordo-piega-schiaccia-01.jpg

Printed aluminum perforated flat tray

Printed aluminum tray 15/10 thickness with folded edge
 

Teglia-ondulata-allumino-forata-traversino-acciaio-4l.jpg

Aluminium perforated corrugated tray
with lower support

Corrugated perforated aluminum tray with aluminium lower crossbar

teglia-ondulata-alluminio-forato-con-telaio-05l.jpg

Aluminium perforated corrugated tray
with frame

Corrugated perforated aluminum tray with frame - 10/10 thickness natural, silicone or Teflon coated

teglia-piana-alluminio-forato-con-telaio-06l.jpg

Flat perforated aluminium flat tray with frame and rivet-free.

15/10 thickness. Natural, siliconized or Teflon-coated®. 

Nuovo-telaio-stondato-07l.jpg

New model with round frame

New rounded frame version

Nuove-teglie-con-telaio-inox-8-1l.jpg

New trays with stainless steel support

New trays with stainless steel frame

teglie-lamiera-alluminata-pizza-hamburger-9-1l.jpg

Aluminized steel tray with molds
for pizza / hamburger

Trays in aluminized sheet for pizza or hamburger - circular shapes with different diameters between 45 and 160 mm

bacinelle-lamiera-alluminata-per-pane-in-cassetta-10-1l.jpg

Basins carrè in aluminized steel

Frame with basins, made to measure and on specific request

stampi-rotondi-lamiera-alluminata-o-alluminio-11-1l.jpg

Baking round trays in aluminized steel or full aluminium.

Round, turned and flared cake pans in aluminum or aluminized sheet

Teglie-lamiera-alluminata-forme-assortite-1l.jpg

Aluminized steel trays with various molds

Tray with assorted shapes, preferably in aluminized sheet - thickness 8/10

teglie-GN-03L.jpg

GN GASTRONORM trays

Trays  GN  2/1–1/1 – 2/3 –1/2 in solid aluminum or perforated 15/10 thickness with open corners

bottom of page